How to Choose the Right Geocell Height

Choose a geocell height based on ground conditions, loads, infill and drainage. Compare 50–300 mm options for roads, slopes, ponds and canals.

Wheel ruts are a problem on construction roads. On slopes, rainwater can cut channels into the soil. Geocells can help in both cases. On roads, the goal is to limit how far aggregate spreads sideways under load. On slopes, it is to reduce the amount of surface fill washed away by rainfall. Start by identifying which problem the cells need to address.

What does geocell height change?

A geocell system is a three-dimensional panel that opens into a honeycomb on site. The cell walls restrict the lateral movement of the soil or aggregate inside them. The cell height determines the depth of fill enclosed by those walls. Geoser offers high-density polyethylene (HDPE) panels in 50, 100, 150, 200 and 300 mm heights.

What information do you need for roads, slopes and ponds?

  • Construction roads and soft ground. Assess axle loads, traffic frequency, subgrade bearing capacity and the proposed aggregate together. Select the cell height alongside the other pavement layers and the drainage design. Explore road base and soft ground stabilisation applications.
  • Slopes and erosion control. The gradient and length of the slope, the path of surface runoff and the type of infill all affect the choice. If the slope will be vegetated, allow for the soil depth that roots need. Assess surface erosion control and overall slope stability separately. Explore slope protection applications.
  • Pond and canal linings. Consider the protective layer above the geomembrane, changes in water level and the anchorage detail on the slope. Show both the cover fill and the anchorage detail that protects the liner on the same section drawing. Explore geocell applications over geomembranes in ponds and canals.

How does a 50 mm difference affect the fill quantity?

Across 1,000 m², the nominal infill volume is about 100 m³ for 100 mm cells and about 150 m³ for 150 mm cells. In this rough estimate, an extra 50 mm of cell height adds 50 m³ of fill. When calculating order quantities, account separately for compaction, material losses and any cover above the cells. See what else affects the price of geocell per square metre.

Geocell terms in international specifications

When comparing catalogues and quotations in different languages, look for the following terms. Check the cell height, cell opening and wall type separately in each product data sheet.

  • Turkish — Geohücre, hücresel dolgu sistemi
  • English — Geocell, cellular confinement system (CCS)
  • Spanish — Geocelda, sistema de confinamiento celular
  • Russian — Геоячейка, объёмная георешётка
  • Arabic — جيوسيل، نظام الحبس الخلوي

Get a geocell quote for your project

Share the application, area in square metres, project location, any available section drawings and the proposed infill with Geoser. Include expected traffic for road projects or the gradient for slope projects. This information lets you compare panel options against the same project conditions. Request a geocell quote from Geoser.

Geocell questions

Are geocell height and cell opening the same measurement?

Height is the vertical dimension of the wall. The opening describes the horizontal size of the cell after the panel is expanded on site.

Is a 100 mm geocell suitable for every road?

The appropriate height depends on subgrade bearing capacity, axle loads, traffic frequency, aggregate and the road cross-section.

How do perforated geocells affect drainage?

With suitable granular infill, perforations can help water move between cells. The drainage design also needs an outlet.

Where geocell works

One honeycomb panel confines soil, aggregate or concrete so the infill behaves like a rigid, load-spreading mattress.

Why buy from Geoser

Our own plant

Welded, expanded and checked in Ankara. No middlemen.

Geomembrane + geocell

One supplier for the liner and the cell layer on top of it.

40+ countries

Export packing, documents and freight handled for you.

Fast, clear quotes

Price per m² by height, with volume discounts shown upfront.

On site

Geocell laid over an HDPE geomembrane liner on the side slopes of a pond in Dilovası, Türkiye, and as base stabilisation in a trench.

HDPE pond side slopes, Dilovası
HDPE pond side slopes, Dilovası
Geocell over geomembrane, infill starting
Geocell over geomembrane, infill starting
Trench base stabilisation
Trench base stabilisation
Geoser HDPE geocell — On site
Geoser HDPE geocell — On site
Geoser HDPE geocell — On site

Made in our plant in Ankara

Every panel is welded, expanded and checked in our own factory before it ships.

Perforated panel, expanded for inspection
Perforated panel, expanded for inspection
Weld check across the full panel
Weld check across the full panel
Panels laid out on the factory floor
Panels laid out on the factory floor
Folded panels palletised and ready to ship
Folded panels palletised and ready to ship

Specifications

Virgin HDPE strips, ultrasonically welded. Smooth or textured, perforated or solid walls.

Geoser HDPE geocell 5 cm — Cell height
5 cm Light slope cover, landscaping
Geoser HDPE geocell 10 cm — Cell height
10 cm Slopes, footpaths, light traffic
Geoser HDPE geocell 15 cm — Cell height
15 cm Roads, channels, parking
Geoser HDPE geocell 20 cm — Cell height
20 cm Heavy load support, haul roads
Geoser HDPE geocell 30 cm — Cell height
30 cm Retaining walls, very soft subgrade
Cell heightTypical useWeld spacingStrip thickness
50 mmLight slope cover, landscaping330 · 356 · 445 · 660 · 712 mm1.2 – 1.5 mm
100 mmSlopes, footpaths, light traffic330 · 356 · 445 · 660 · 712 mm1.2 – 1.5 mm
150 mmRoads, channels, parking330 · 356 · 445 · 660 · 712 mm1.2 – 1.5 mm
200 mmHeavy load support, haul roads330 · 356 · 445 · 660 · 712 mm1.5 mm
300 mmRetaining walls, very soft subgrade330 · 356 · 445 · 660 · 712 mm1.5 mm

Instant quote

Pick the panel and area. You see an indicative price straight away, and a formal quote reaches your inbox shortly after.